Network Projection - 183M Conference Room

* You must have Internet connection to connect to the Projector (ie: AirBears2) *

  1. Turn ON the Projector (Model EX7240).
  2. Go to:
  3. Select “Advanced Connection Mode” click OK (In Windows 10, The EasyMP software may prompt to modify the firewall - Click YES at the prompt).
  4. Launch the EasyMP, in search Mode, select:
    • If ERSO-PROJ does not appear in the “Status” field, switch to manual search and enter its IP-Address:
  5. Once found, select the projector and click “Connect”